1. Appearance requirements |
| |
1.1 Appearance | Achromatic or slightly yellow lucid film,with velvet surface that has no scar or crease | |
1.2 Dotted waste sundries and air bubbles | Mark them,and add 1m each place | |
≤0.5mm | Not exceeding 8 places per roll | |
>0.5mm | Not exceeding 5 places per rol | |
3. Thickness(mm) | 0.38mm±0.02mm | 0.76±0.02mm |
4. Density(g/cm³) | 1.07g/cm³ | |
5. Tensile Strength(MPa) | ≥20MPa | |
6. Elongation at peak(%) | ≥200% | |
7. Uniformity | The transverse thickness deviation within distance of 25mm ~ E does not exceed 15μm. The transverse thickness deviation within distance of 50mm ~ E does not exceed 20μm | |
8. Moisture(%) | 0.25-0.55 | |
9. Haze(%) | <0.6 | |
10. Light transmittance(%) | >86% | |
11. Shrinking Rate(60℃/15min)(%) | ≤8 |