Baizan 0.76mm pvb film green on clear for car glass for car glass Product volume>12000t per year Payment terms:TT LC DP Delivery time:5-15days After-sale service：We will follow customer’s testing result, and if there is a problem, we will check it out at site. Impact resistance test Prepare 12 pieces of 300 * 300 mm glass with thickness of 2 mm, wash them and put them flat, place the sample on the glass and lay another piece of glass on them，then cut the glass , pay attention to avoid stretching the film, and to ensure that the outside of the glass diaphragm margin in 2mm or so. Then place the assembled intermediate film glass in a vacuum chamber at 160 ± 5 °C for 90 minutes under negative pressure of 8.5 ~ 104 PA. After the six pieces were placed at the temperature of 20 ± 5 °C for at least 4 hours, the pieces were fixed on the specimen bracket of the glass impact test machine, and the weight is 2260 G ± 20 G, , the steel ball with a diameter of about 82mm dropped vertically from a height of 4M (within 3 °) , the impact point should be within 25mm of the center of the sample, if the steel ball did not penetrate into the sample within 5s, and all 6 pieces of the test meet the standard requirements and will be judged to be qualified; If 4 or less tests meet the requirements of the standard will be judged to be unqualified; if 5 tests all meet the requirements of the standard, add 6 pieces new samples, if 6 all meet the requirements of the standard is qualifiedTest Result Moisture resistance test First, turn on the power of the water boiling box and heat the water to 100℃. Prepare a piece of glass 300*300mm and thickness as 2 mm. Put the glass into the vacuum box and keep it for 5 minutes. Then take it out and boil it directly in the boiling box. Then observe that there are no bubbles or white or other abnormal conditions, it is judged to be qualified. Cracks are allowed, but no bubbles, discoloration, or other defects can occur 15mm beyond the edge or 10mm beyond the crack.